100% Original Pigment For Interior And Exterior Wall Coatings - ADDITIVES FOR POWDER COATINGS - Hermeta
100% Original Pigment For Interior And Exterior Wall Coatings - ADDITIVES FOR POWDER COATINGS – Hermeta Detail:
WAX POWDER TRY-050F FOR POWDER COATINGS
| MELTING POINT（ ℃ ） | DENSITY（g/cm3） | VISCOSITY（mpa.s 140°C） | PACKAGING ( KG ) | HOW TO USE |
| 110 | 0.95-0.97 | 9-25 | 25（COMPOUND BAG） | IT CAN BE ADDED IN ANY STEPS. THEN IT SHOULD BE DISPERSED HOMOGENEOUSLY. |
FEATURES AND APPLICATIONS
IT IS FISCHER TROPSCH WAX WITH GOOD LEVELLING ABILITY AND SCRATCH RESISTANCE. IT WILL NOT PRODUCE THE SMOKE. IT IS HIGHLY RECOMMENDED IN THE APPLICATION OF POWDER COATINGS.
USAGE AMOUNT（%）
THE RECOMMENDED ADDITION AMOUNT IS 0.5-1.5% OF THE TOTAL QUANTITY OF THE FORMULA. YOU CAN CHOOSE THE OPTIMUM AMOUNT ACCORDING TO DIFFERENT PRACTICAL NEEDS.
WAX POWDER TRY-060F FOR POWDER COATINGS
| MELTING POINT（ ℃ ） | PENETRATION DEGREE（10-1mm） | AVERAGE PARTICLE SIZE（μm） | PACKAGING ( KG ) | HOW TO USE |
| 120 |
| 4-6 | 20（COMPOUND BAG） | IT CAN BE ADDED IN ANY STEPS. THEN IT SHOULD BE DISPERSED HOMOGENEOUSLY. |
FEATURES AND APPLICATIONS
IT IS A KIND OF MICRONIZED FISCHER TROPSCH WAX WITH EVENLY DISTRIBUTED MOLEULAR WEIGHT. IT HAS LITTLE EFFECT ON THE GLOSS AND GOOD DISPERSIBILITY. IT IS RECOMMENDED IN THE APPLICATION OF INDUSTRIAL PAINT, WAX FOR POWDER COATINGS AND OFFSET PRINTING INK. IT IS VERY COST-EFFECTIVE.
USAGE AMOUNT（%）
THE RECOMMENDED ADDITION AMOUNT IS 0.5~1.0% OF THE TOTAL QUANTITY OF THE FORMULA. PLEASE CHOOSE THE OPTIMUM AMOUNT ACCORDING TO DIFFERENT PRACTICAL NEEDS.
ANTISTATIC AGENT 308
| FREEZING POINT °C | CONTENT % | IODINE VALUE | PACKAGING ( KG ) |
| 60.0-70.0 | ≥90% | gI2/100g≦4.0 | 25（COMPOUND BAG） |
APPLICATIONS
IT IS A KIND OF NON-TOXIC PLASTICIZER, ANTI-AGING AGENT AND FOAMING AGENT WIDELY USED FOR THE MANUFACTURE OF POWDER CATINGS. IT EFFECTIVELY IMPROVES THE FLEXIBILITY, PLASTICITY AND ANTISTATIC PROPERTY OF THE PRODUCT.
FEATURES
IT IS A KIND OF WHITE POWDER SUBSTANTIALLY FREE OF IMPURITIES.IT IS INSOLUBLE IN WATER AND SOLUBLE IN ALCOHOL, BENZENE AND ACETONE. IT WILL BE EMULSIFIED TO SOLID WATER-BORNE POLYMER DISPERSION WHEN SHAKED INTENSELY WITH HOT WATER. HLB VALUE OF THE ONE WITH 90% MONOSTEARIN IS 3.9-5.3. IT IS A KIND OF MULTIPURPOSE EMULSIFIER WHICH IS A SAFE INTERNATIONALLY RECOGNIZED FOOD ADDITIVE WITHOUT LIMITED APPLICATION AMOUNT IN FDA.
DELUSTERING AGENT 2500
| GLASS TRANSITION TEMPERATURE °C | ACID VALUE（mg/gKOH） | APPEARANCE | PACKAGING ( KG ) |
| 125 | 285 | PARTICLE MATTER OR POWDER | 25 |
APPLICATIONS
IT IS A REACTION TYPE OF DELUSTERING AGENT FOR POWDER COATINGS. IT IS APPLICABLE TO THE TRANSPARENT AND MATTE POWDER COATINGS.
FEATURES
IT IS MATTE BLACK WITHOUT BLEACHING. IT HAS GOOD SCRATCH RESISTANCE.
DEFOAMER 6801
| MELTING POINT（ ℃ ） | ACID VALUE（mg/gKOH） | AMINE VALUE（mg/gKOH） | PACKAGING ( KG ) |
| 141.5-146.5 | ≤7.5 | ≤2.5 | 25 |
APPLICATIONS
IT IS APPLIED IN DEFOAMING PROGRESS WHEN USING THE POWDER COATINGS, CAST IRON AND ALUMINIUM MATERIAL.
FEATURES AND APPLICATIONS
ADDITION AMOUNT VARIES ACCORDING TO THE QUANTITY OF PIGMENT FILLERS. ADDITION QUANTITY OF THE DEFOAMER: 0.5～5% OF THE FILLER QUANTITY.
HMTaddtive 260
| PRODUCT CATEGORY | MELTING POINT（ ℃ ） | ACID VALUE（mg/gKOH） | APPEARANCE | PACKAGING ( KG ) |
| ANTIOXIDANTS | 160-180°C | ≤1.0 | POWDER WITH SLIGHT ODOR | 25 |
APPLICATIONS
IT IS USUALLY NOT USED SEPARATELY. IT IS WIDELY USED IN THE APPLICATIONS OF MACROMOLECULAR MATERIALS SUCH AS PE, PP, PS, POLYAMIDE, POLYCARBONATE AND ABS AFTER MIXING WITH PHENOLIC ANTIOXIDANTS.
FEATURES
IT IS A KIND OF ORGANIC PHOSPHITE ESTER WITH HIGH PERFORMANCE. IT HELPS TO PREVENT DISCOLORATION OF POLYMERS. DEGRADATION RATE OF THE POLYMERS CAN BE LOWERED. THE PERFORMANCE OF GAS FADING RESISTANCE OF RESIN CAN BE IMPROVED.
HMTaddtive 9200
| PRODUCT CATEGORY | MELTING POINT（ ℃ ） | PARTICLE SIZE (μm) | APPEARANCE | PACKAGING ( KG ) |
| ANTI-SCRATCH AGENTS | 320°C | D50:4,D99:10 | WHITE POWDER | 25 |
APPLICATIONS
IT MAKES THE ALUMINIUM-FOIL PAPER EASY TO BE SHREDDED.
FEATURES
IT IS PURE PTFE WAX, WHICH CAN SIGNIFICANTLY IMPROVE THE ANTI-SCRATCH PROPERTY, ABRASION RESISTANCE AND SMOOTHNESS OF THE COAT.
Product detail pictures:
Related Product Guide:
Dedicated to strict quality management and thoughtful client services, our experienced staff customers are generally available to discuss your demands and guarantee full client pleasure for 100% Original Pigment For Interior And Exterior Wall Coatings - ADDITIVES FOR POWDER COATINGS – Hermeta , The product will supply to all over the world, such as: Ukraine, European, Thailand, Our monthly output is more than 5000pcs. We have set up a strict quality control system. Please feel free to contact us for further information. We hope that we can establish long-term business relationships with you and carry out business on a mutually beneficial basis. We are and will be always trying our best to serve you.
By Lauren from Oman - 2017.09.16 13:44 Customer service staff and sales man are very patience and they all good at English, product's arrival is also very timely, a good supplier.
By Joanna from Mumbai - 2017.09.26 12:12 
